24-Hour EM 385-1-1 Online Course: Ensuring Safety

Course Modules - (33)

Safety and Occupational Health Program Management for United States Army Corps of Engineers Personnel

1) Safety and Occupational Health Program Management for United States Army Corps of Engineers Personnel
2) Program Management
3) Safety and Health Management
4) How the Components Interact
5) Identifying the Marks of Excellence
6) Risk and How to use a Risk Matrix
7) Toolbox Talk: Accident and Incident Reporting
8) Pre Job Hazard Analysis
9) Writing Activity Procedure | Activity Hazard Analysis (AHA), Hazard Identification, OSHA Standards Training
10) How to Identify Hazards | Activity Hazard Analysis (AHA), Haz ID, OSHA Rules Safety Training
11) Activity Hazard Analysis - Activity Steps and Tasks
12) The Importance of Documenting with Images
13) Incident Investigation
14) Incident/Accident Analysis
15) Incident Investigation

Safety and Occupational Health Program Management for Contractors

1) Safety and Occupational Health Program Management for Contractors
2) 2024 SWG Safety Standdown Video
3) For USACE Safety Specialist the Work is Personal
4) USACE Nashville District Talks Successful Safety Program
5) How to Prepare an Activity Hazard Analysis Report
6) How to Add a Mishap Report to a QA/QC Daily Report
7) Brief Tutorial on Completing the OSHA Recordkeeping Forms
8) SITE SAFETY & HEALTH OFFICER (SSHO) DESIGNATION LETTER
9) MISHAP NOTIFICATION AND INVESTIGATION
10) UNITED STATES ARMY CORPS OF ENGINEERS ACCIDENT INVESTIGATION REPORT
11) Activity Hazard Analysis (AHA)
12) USACE ERGONOMICS PROGRAM POLICY

OVERVIEW OF THE UPDATED EM 385-1-1 (15 MARCH 2024)

Temporary Facilities

Medical and First Aid Requirements

1) Medical and First Aid
2) Medical & First Aid
3) Regulations for Workplace First Aid
4) BLOODBORNE PATHOGENS TRAINING VIDEO
5) Bloodborne Pathogens OSHA Training Video: Essential Safety Guide
6) Medical Emergencies
7) Good Samaritan Law & Definition - Can I be sued?
8) Best Practices Guide: Fundamentals of a Workplace First-Aid Program
9) Requirements for Basic First Aid Unit Package
10) First Aid Supplies
11) First Aid Kit Update: Effective October 15, 2022

Toxic Agents & Environments

1) Hazardous or Toxic Agents and Environments
2) Toxic Agents & Environments
3) OSHA Lead in Construction: an Overview
4) ALARA and Radiation Safety
5) Chemical Toxicology
6) Process Safety Management (PSM)
7) Common Process Safety Management Chemicals
8) Protecting Workers from the Hazards of Abrasive Blasting Matererials
9) Operating a Blast Pot
10) Asbestos
11) INDUSTRIAL HYGIENE PROGRAM
12) Hazardous Materials Transportation Training Requirements

Personal Protective and Lifesaving Equipment

1) Personal Protective and Lifesaving Equipment
2) Personal Protective and Lifesaving Equipment
3) PPE Safety Training for Construction Workers
4) ABCs of Active Fall Protection | Anchor, Body Harness, Connector
5) Fall Protection Anchors for Construction - clamps, I-beam, beamer, strap (M3V1 Anchors Overview)
6) Donning a Fall Protection Harness
7) Selection, Fit Test of Harness
8) Inspection Procedures Harness
9) Respiratory Protection in Construction: An Overview of Hazards & OSHA's Program Requirements
10) Toolbox Talk: Eye Protection
11) Testing common types of Personal Protective Equipment (PPE)
12) How to Select and Use Hearing Protection
13) Personal Protective Equipment
14) Personal Protective Equipment

Personal Protective and Lifesaving Equipment (Marine)

1) Hazard Assessment
2) PPE Selection
3) PPE Selection > Head Protection
4) PPE Selection > Eye and Face Protection
5) PPE Selection > Foot Protection
6) PPE Selection > Hearing Protection
7) PPE Selection > Respiratory Protection
8) PPE Selection > Hand and Body Protection
9) PPE Selection > Lifesaving Equipment and Personal Flotation Devices
10) PPE Selection > Personal Fall Protection Equipment
11) Employee Training
12) Cleaning, Maintenance and Replacement

Fire Protection & Prevention

1) Fire Prevention and Protection
2) Fire Protection & Prevention
3) Fire Prevention Plan
4) Introduction to Pre Incident Planning
5) What is a Fire Alarm System?
6) Fire Suppression Systems Training : Follow the Water
7) Firefighting Strategies for the Wildland/Urban Interface
8) Bottom Fired Kettle Safety Training Video
9) Temporary Heaters
10) Yearly Fire Extinguisher Inspection
11) Monthly Fire Extinguisher Inspections
12) Fire Sprinkler Testing and Maintenance
13) Hot Work Permit
14) Fire Watch Safety Video
15) Hot Work Permit
16) PORTABLE FUELED SPACE HEATERS

Hand and Power Tools

1) Hand and Power Tools
2) Hand & Power Tools
3) Power Tool Safety — It's In Your Hands
4) Hand Tool Safety
5) Toolbox Talk: Dangers of Compressed Air
6) Chainsaw How To - Personal Protective Equipment
7) Chainsaws 101: Chainsaw Safety Basics
8) POWDER ACTUATED TOOL SAFETY
9) Powder Actuated Tools
10) Nail Gun Safety
11) Carbon Monoxide in Construction/Portable Gas-Powered Equipment
12) Safety Moment "How A GFCI Works" with Tim Neubauer
13) Amputations FactSheet

Work Platforms & Scaffolding

1) Work Platforms and Scaffolding
2) Work Platforms & Scaffolding
3) OSHA-Support Structure
4) OSHA-Fabricated Frame
5) OSHA-Two-point (swing stage)
6) OSHA-Pole or Wood Pole
7) OSHA-Mast Climbers
8) OSHA-Ladder Jack
9) OSHA-Specialty and Other Scaffolds
10) OSHA-Interior Hung
11) Aerial Lifts
12) Summit Aerial Lift Safety Video
13) Aerial Lift Fall Protection

Electrical

1) Electrical
2) Electrical
3) Electrocution/Work Safely with Ladders Near Power Lines
4) Prevent Electrocutions: Work Safely with Cranes near Power Lines
5) Electrical Safety Awareness for Non-Electrical Workers | Schneider Electric
6) OSHA Focus Four Electrical
7) Electrical Grounding Explained | Basic Concepts
8) Limited Approach Boundary
9) Lithium Ion battery safety tips
10) Toolbox Talks - Generator Safety & Use
11) Fully Understanding How GFCI's Work
12) Arc Flash Overview
13) Electrical Specific PPE
14) Energized Electrical Work Permit
15) Electrical Hazards
16) OSHA Focus Four Hazards:Electrocution

Rigging

1) Rigging
2) Rigging
3) Boom Deflection & Shock Loading | Sims Crane Minute
4) How to Calculate & Determine the Weight of a Load for Overhead Lifts
5) Shock loads explained
6) Why Things Fall Off Cranes
7) Rigging Basics 101
8) Crane Hand Signals in 2 Minutes
9) What Is a Lift Director
10) Basic Crane Hand Signals
11) Lifting Slings 101: Choosing the right lifting sling for your job
12) What are the ASME B30.2 Hand Signals for Overhead and Gantry Cranes?
13) Wire Rope Capacities EIP and EEIP
14) How to Inspect Shackles to ASME B30.26 Standards
15) Hoisting and Rigging Fundamentals
16) Subpart CC – Cranes and Derricks in Construction: Qualified Rigger
17) Subpart CC – Cranes and Derricks in Construction: Signal Person Qualification
18) LOAD HANDLING EQUIPMENT CRANE OPERATION CRITICAL LIFT PLAN
19) Ropes, Chains, and Slings
20) Shackles and Hooks

Load Handling Equipment (LHE)

1) Load Handling Equipment (LHE)
2) Load Handling Equipment
3) Crane Safety Awareness For Site Superintendents
4) Why Cranes Collapse
5) Pile driver operation and safety
6) Load Testing Our 40 Ton Overhead Crane Installation
7) Rigging USACE
8) Why Subpart CC?
9) CERTIFICATE OF COMPLIANCE FOR LOAD HANDLING EQUIPMENT AND RIGGING
10) OSHA Cranes & Derricks Subpart CC
11) Small Entity Compliance Guide for the Final Rule for Cranes and Derricks in Construction
12) Inspection
13) Hoisting and Hauling Equipment
14) Chain Falls and Pull-Lifts
15) Load Handling Equipment and Lift Plan

Vehicles, Machinery and Equipment

1) Vehicles, Machinery and Equipment
2) Vehicles Machinery & Equipment
3) Bobcat Rotary Telehandlers in action
4) Drilling Animation
5) Forklift Load Operations
6) Telehandler Load Charts
7) Pre-Operation Safety & Maintenance Inspection | Construction Equipment
8) Safe Operations of Concrete Pump
9) Mechanical and Machinery hazards | Contact With Moving Parts of Equipment
10) Powered Industrial Trucks Forklifts
11) Machinery and Vehicular Safety

Welding and Cutting

1) Welding and Cutting
2) Welding and Cutting
3) Hot Work: Hidden Hazards
4) Welding Safety Tips and Precautions You Need to Know
5) Oxy-fuel Equipment Safety
6) Oxygen and Acetylene Safety Precautions
7) Welding Safety: Electric Shock
8) Electric Welding Safety: How to be Safe
9) Grinder Safety | How to Properly Use an Angle Grinder
10) Blankets
11) Fire Watch
12) Cutting, Welding, and Other Hot Work
13) Welding and Cutting Safety
14) Controlling Hazardous Fume and Gases during Welding
15) HOT WORK FACT SHEET

Excavation and Trenching

1) Excavation and Trenching
2) Excavation and Trenching
3) Safety Toolbox Talks: Trenching and Excavation Safety
4) Excavations in Construction/Trenching OSHA
5) Excavations in Construction/Soil Classification
6) Trenching, Shoring and The Competent Person
7) What are the Different Types of Soil? Trenching and Excavation
8) What is the Maximum Slope for Different Soil Types? Sloping and Benching |
9) Inspecting a Trench for Fissures and Cracking
10) Underpinning Explainer
11) Excavation Hazardous Atmosphere
12) Trenching and Excavation Safety
13) Trenching and Excavation Safety Fact Sheet

Hazardous Energy

1) Control of Hazardous Energy
2) Hazardous Energy
3) Control of Hazardous Energy
4) Introduction
5) Scope and Application
6) Purpose
7) Definitions
8) Energy Control Program
9) Energy Control Procedures - Documentation
10) Energy Control Procedures - Required Content
11) Periodic Inspection
12) Employee Training and Communication
13) Additional Training (Tagout System)
14) Employee Retraining
15) New or Modified Equipment
16) Full Employee Protection
17) Materials and Hardware
18) Application of Energy Control
19) Release from Lockout/Tagout
20) Testing of Machines
21) Outside Personnel (Contractors)
22) Group Lockout-Tagout Requirements
23) Shift & Personnel Changes

Material Handling, Storage, Disposal, and Conveyors

1) Material Handling, Storage, Disposal, and Conveyors
2) Material Handling
3) Safety Toolbox Talks: Material Handling and Safe Lifting
4) Toolbox Talk: Material Handling
5) Storage of Materials
6) Manual Materials Handling on a Construction Project
7) Lifting - Using the Power Zone
8) Housekeeping - The importance of the basics
9) Public Safety Orientation For Construction Sites
10) Belt Conveyor Tutorial
11) Electric Pallet Jack Safety Training
12) MQ Whiteman Power Buggy Pre-Operation
13) Hand Carts/Trucks Material Handling
14) Construction Passenger and Material Lifting Hoist Building Elevator Fall Down Test in USA
15) Construction Safety Flammable Liquids: Safety Cans, Refueling, Storage
16) Truck Mounted Articulating Knuckle Boom Cranes
17) Materials Handling, Storage OSHA

Confined Spaces

1) Confined Space Entry
2) Confined Space
3) 6 Common Confined Space Questions Answered
4) What is a Confined Space
5) Permit-Required Confined Space
6) What is an Entry Permit What is a Confined Space Entry Permit: Confined Space Hazards
7) Confined Space Roles
8) Confined Spaces Deadly Spaces: Carbon Monoxide, Hydrogen Sulphide, and Other Toxic Gases
9) Confined Space Air Monitoring
10) Ventilation in Confined Space
11) Reclassifying Permit-Required Confined Spaces (PRCS)
12) Retrieval and Emergency Services in Confined Spaces
13) Confined Space Basics
14) Confined Spaces in Residential Construction
15) Is 911 your Confined Space Rescue Plan?
16) FATAL Facts

Confined Space (Marine)

1) Confined or Enclosed Spaces and Other Dangerous Atmospheres
2) Pre-Entry (Planning) >> Testing the Atmosphere
3) Initial Entry Testing >> Warning Signs and Labels
4) Initial Entry Testing >> Visual Inspection
5) Initial Entry Testing >> Ventilation
6) Cleaning and Other Cold Work
7) Cleaning Preparation
8) Cleaning Operations
9) PPE Selection
10) Hot Work (including Welding, Cutting and Heating)
11) Preparing Space for Hot Work
12) Surface Preparation
13) Toxic Cleaning Solvents
14) Chemical Removers
15) Mechanical Removers
16) Flammable and Combustible Liquids
17) Painting and Other Coatings
18) Overview

Steel Erection

Safe Access

1) Safe Access
2) Safe Access
3) Walking-Working Surfaces OSHA Standard
4) OSHA-Accessibility
5) Workplace Accidents from Ladders | Fatal Falls From Ladders, OSHA, Fall Protection Training
6) Ladder Safety Overview
7) Portable Ladder Safety Training
8) OSHA-Stairways and Ladders
9) OSHA-Ladder Safety
10) Stairs and Ladders PPT
11) OSHA-Falls: Misuse of Portable Ladders
12) How to Inspect and Maintain Your Ladder
13) How to Pick the Right Ladder for the Job
14) How to Safely Set Up Your Portable Ladder

Hazardous Waste Operations and Emergency Response (HAZWOPER)

1) Hazardous Waste Operations and Emergency Response
2) HAZWOPER
3) OSHA: 1910.120
4) What is HAZWOPER ?
5) HAZWOPER
6) Medical Surveillance Program
7) Donning Level A & Level B DuPont™ Tychem® Encapsulated Suits
8) Level A Decontamination Process
9) Air Monitoring
10) Plugging, Patching, and Overpacking
11) Key Provisions and Employer Requirements Under the HAZWOPER Standard
12) Hazardous Waste Operations and Emergency Response
13) Fact Sheet OSHA
14) Fact Sheet EPA

View More Module

Keep in mind: This course doesn't meet the USACE 24-Hour Fall Protection Competent Person Training requirement, which needs at least eight hours of in-person training.

This intermediate-level course has been designed for Contractors and Employees who need to fulfill EM 385-1-1 training requirements for government or army contract work. Collateral Duty Safety Officers or CDSOs must take this course in addition to the 24 hours of mandatory refresher training every four years.
Our course will cover the EM 385-1-1 manual, which contains the U.S. Army Corps of Engineers' occupational safety and health rules. It will also cover workplace management, the requirements for personal protection equipment, fall prevention, and other topics.

Who Needs Our 24-Hour EM 385-1-1 Training?

Our course is best for employees who are required to complete EM 385-1-1 training of 24 hours, including:
●       Contractors who work on USACE projects or military installations.
●       Government or military employees who must comply with or enforce EM 385-1-1 standards
●       Collateral Duty Safety Officers (CDSOs) who are required to undergo a 24-hour refresher training after every four years.
EM 385-1-1 training is of different types depending on the hours of training. We also offer the 40-Hour EM 385-1-1 and 16-Hour EM 385-1-1 training courses for employees who have to meet the EM 385-1-1 training standards.

Learning Outcomes:

Understand safety protocols in the workplace.
Recognize potential hazards and mitigate risks.

Completion Requirements:

100% appearance for the course
Fully involvement in all class trainings (determined by instructor)
Completion of Continuing Education and Training Registration Form
Completion of mandatory quiz assessments
As applicable, attainment of least passing score on required end-of-course examination
Participation and submittal of end-of-course assessment form (must provide name on form to obtain credit)

What's the difference between 16, 24, and 40-hour EM 385-1-1 training?

The 16 and 24-hour courses are for workers like contractors, military members, and government employees. But if you're a manager or supervisor working on military projects, you'll need the 40-hour course. It covers more safety topics in detail.

Students may request IACET CEU credit upon successful completion of the course, provided all required criteria are met. This option is available for those who wish to receive official recognition of their continuing education.

Price: $104.99

Add To Cart

You will be awarded a certificate instantly.

This Course Includes

Modules : 33
Duration : 24 Hours
Certificate : Yes:
Language : English
Skill Level : Proficient

USACE-24-Hour EM 385-1-1

Who Needs Our 24-Hour EM 385-1-1 Training?

Completion Requirements:

What's the difference between 16, 24, and 40-hour EM 385-1-1 training?

Students may request IACET CEU credit upon successful completion of the course, provided all required criteria are met. This option is available for those who wish to receive official recognition of their continuing education.

Price: $104.99

Schedule

Quick Links

Company

Contact