Login

Price: $49.99 $59.99

Add To Cart
Swing Stage Certification

Swing Stage User Training

This program targets individuals tasked with operating swing-stage scaffolds in various workplace settings. The curriculum covers planning, risk management strategies, and routine safety inspections for swing-stage scaffolds and their related equipment.

18 Modules
5.00

Swing Stage Safety: A Guide for Users

Working from a swing stage can be an effective way to execute tasks at heights in construction. However, it's important to prioritize safety due to the essential risks involved. This course provides an overview of swing stage user training and crucial safety aspects.

  • What is Swing Stage User Training?

    Swing stage user training equips individuals with the necessary knowledge and skills to safely operate and work from a suspended scaffold. This training typically covers the following:

    Understanding Swing Stages: Components, types, and weight capacity of swing stages.

    Safety Regulations: Relevant OSHA or local safety standards for swing stages.

    Hazard Identification: Identifying potential risks such as falls, falling objects, and electrocution.

    Fall Protection Systems: Proper use of harnesses, lifelines, and lanyards.

    Pre-use Inspections: Conducting visual checks of the swing stage and its components.

    Safe Work Practices: Entering/exiting procedures, proper body positioning, and material handling on a swing stage.

Course Modules - (18)

  • 1) Suspended Scaffold Intro
  • 2) Suspended Scaffold
  • 3) Criteria for Suspended Scaffolds
  • 4) Toolbox Talk: Suspended Scaffold Safety
  • 1) Case Study "Dramatic Rescue After Scaffolding Collapse In Palmetto Bay"
  • 2) Preventing Worker Injuries and Deaths Caused by Falls From Suspension Scaffolds
  • 1) OSHA-Suspended Scaffold/Swing Stage
  • 1) OSHA-Catenary
  • 2) OSHA-Float (ship)
  • 3) OSHA-Interior Hung
  • 4) OSHA-Multi-level
  • 5) OSHA-Multi-point Adjustable
  • 6) OSHA-Needle Beam
  • 7) OSHA-Single-point Adjustable
  • 1) Subpart E : Personal Protective and Life Saving Equipment
  • 2) Personal Protective and Life Saving Equipment
  • 3) Subpart M : Fall Prevention
  • 4) Subpart L: Scaffolds
  • 5) OSHA 1926.450 - Scope, Application and Definitions Applicable to this Subpart
  • 1) Donning a Fall Protection Harness
  • 2) Inspection of fall protection
  • 3) Inspection Procedures Harness
  • 4) Personal Protective Equipment (PPE) Introduction | PPE Safety Training for Construction Workers
  • 5) Fall Protection Harness Selection
  • 1) Measurements for Assessing Fall Hazards and Controls
  • 2) Calculating Fall Distance
  • 3) Fall Distance Educator
  • 4) Fall Protection Fact Sheet
  • 5) Warning Line | OSHA, Fall Protection Training, Roofing Work, Workplace Accidents
  • 6) Falling Object Protection | Tool Lanyards, Safety Nets, Fall Protection, Oregon OSHA
  • 7) Do the Math - Calculating Fall Clearance Tutorial (M2V4 Do the Math
  • 8) Drop Object Incidents 3T's of Tool Tethering
  • 1) Hand and Power Tool Safety
  • 2) Suspended Scaffold Use
  • 3) SUSPENDED SCAFFOLDING SAFETY
  • 4) Hand and Power Tools Training
  • 5) Distracted Work at Height - Don’t Do It!
  • 6) CODE OF SAFE PRACTICES FOR SUSPENDED SCAFFOLDS
  • 7) High winds cause workers to swing on scaffolding
  • 8) Wind Speeds and Swing Stages
  • 9) When to Use a Parapet Clamp
  • 10) FALL PROTECTION | Parapet Clamps
  • 11) 6,000 lb Rated Removable Concrete Anchor
  • 12) Roof Loading from Swing Stage Rigging
  • 1) SUSPENDED SCAFFOLD ROOFTOP RIGGING
  • 2) How to Prevent Dropped Objects by Tethering, Topping and Trapping
  • 3) Requirements for TwoPoint Adjustable Suspension Scaffolds
  • 4) Counterweight Formula
  • 5) Calculating the Load on a Suspended Scaffolding Hoist
  • 6) CODE OF SAFE PRACTICES
  • 7) Safety talk Suspended access equipment—Counterweights
  • 8) Counter Weight Calculation
  • 9) Counterweight Formula
  • 10) Suspended access equipment—Counterweights
  • 11) Multi-tier Suspended Platform Load Rating
  • 12) Swing Stages: Number of Hoists vs. Number of Operators
  • 13) Swing Stages Used for Wind Turbine Blade or Tower Maintenance
  • 14) Tiebacks: United States and Canadian Requirements
  • 1) Hoist, Platform & Rigging Equipment Practices
  • 2) Swing Stages, an Introduction
  • 3) POWER CLIMBER POWERMOD PLATFORM
  • 4) SUSPENDED ACCESS EQUIPMENT
  • 5) Suspended Board Rooftop Rigging Logistics
  • 6) Calculating the Load on a Suspended Scaffolding Hoist
  • 7) OVERLOADING SUSPENDED SCAFFOLD HOISTS
  • 8) Power for Suspended Scaffolds
  • 9) Rigging for Stall Load of a Hoist
  • 10) Supplier Qualification for Modular Suspended Platforms
  • 1) 2 Minute Tool Box Talk on the Effect of Sling Angles on SWL
  • 2) Crosby Rigging Tips: Side loading of shackles
  • 1) Ropes 101: The Three Types and When to use Them
  • 2) A Secure, Permanent Hitch - The Scaffold Knot
  • 3) Scaffold Hitch - How to Tie the Scaffold Hitch - How to Suspend a Plank with Rope
  • 4) 7 Essential Knots You Need To Know
  • 5) How to tie two Half Hitches in under 30 seconds
  • 6) How to tie a Square Knot in under 30 seconds
  • 7) How to tie a Sheet Bend in under 30 seconds
  • 8) How to Tie the Most Useful Knot in the World (Bowline)
  • 9) How to tie a Clove Hitch in under 30 seconds
  • 10) Termination Knot
  • 11) GUIDELINES FOR ROPE ACCESS
  • 12) Basic Ropes & Knots
  • 13) SER INSTRUCTION MANUAL TIE-OFF ADAPTER AND SCAFFOLD CHOKER ANCHORAGE CONNECTORS
  • 1) Wire Rope Termination
  • 2) Wire Rope Tip Preparation
  • 3) How To Work With Wire Rope and Wire Rope Clips
  • 4) Installing Wire Rope Clips - The Right Way
  • 5) Which Shackle Should You Be Using?
  • 6) Inspecting Shackles
  • 7) Wire Rope Frequently Asked Questions
  • 8) VERIFY YOUR WIRE ROPE TERMINATIONS: INCORRECT TERMINATIONS CAN LEAD TO CATASTROPHIC FAILURE
  • 9) Working Safely with Wire Rope
  • 10) Rigging Hardware
  • 11) Wire Rope Care and Handling
  • 1) Suspended Scaffold Basics Rigging and Operating Procedures
  • 2) Rigging for Stall Load of a Hoist
  • 3) SAFE WORK PROCEDURES SWING STAGE RIGGING
  • 1) Rope Grabs and Lanyard Length for Window Cleaners
  • 2) Rope Grab Instruction Video
  • 3) Safety Talk How to inspect a Rope Grab and how to use a Rope Grab
  • 4) Lifeline Inspection Authorized Person Training
  • 5) Mobile Rope Grab
  • 6) Rope Grabs
  • 7) USER INSTRUCTION MANUAL SYNTHETIC ROPE GRAB
  • 8) Horizontal Lifelines and Suspended Scaffolds
  • 1) Testing motors for swing stage
  • 2) Spider SC1000 Traction Hoist Features
  • 3) Emergency Features of Sky Climber Hoists
  • 1) A Fall Could Cause a Stroke! | Trauma Straps, Workplace Accident, Suspension Trauma Training
  • 2) How to Rescue a Fallen Worker | Fall Protection
  • 3) Sky Climber Assisted Rescue
  • 4) Exit Routes, Emergency Action Plans
  • 1) Wielding
  • 2) SUSPENDED SCAFFOLD PLATFORM WELDING PRECAUTIONS
View More Module

Benefits of Swing Stage User Training

Enhanced Safety: Workers gain the knowledge and skills to minimize risks while working at heights.

Reduced Accidents: Proper training lowers the chances of falls, injuries, and fatalities.

Increased Confidence: Workers feel more confident and comfortable working from a swing stage.

Compliance with Regulations: Training ensures adherence to safety standards set by OSHA or local authorities.

course
Price: $49.99 $59.99
You will be awarded a certificate instantly.

This Course Includes

  • Modules : 18
  • Duration : 8 Hours
  • Certificate : Yes:
  • Language : English
  • Skill Level : Proficient
money back
About Us

NYC Construction Safety Training (PdhSafety.com) aims to offer quality training that is relevant and useful for the construction industry. These efforts include offering training courses that are essential for achieving success and career outcomes in the construction industry, ensuring that course material is both useful and applicable. We conduct perpetual reviews of training materials to maintain accuracy and relevance, and we are committed to developing a team of high-quality staff and instructors.

Quick Links
Company
Contact
  • Email Address mail@pdhsafety.com
  • Office Address 189 Valentine Ln Yonkers, New York 10705

Copyright © 2021 All rights reserved | NYC Construction Safety Training, LLC (PdhSafety.com)