Make Safety Training Happen

Cal/OSHA Training

OSHA 30 Hour in Construction Safety and Health

28 Modules

Course Modules - (28)

Introduction To OSHA

Managing Safety and Health

1) Managing Safety and Health The Basics
2) How the Components Interact
3) Identifying the Marks of Excellence
4) ACCIDENT VS INCIDENT | The difference explained.
5) Safety Manager
6) Guide to Developing Your Workplace Injury & Illness Prevention Program
7) Construction Safety Inspection
8) Recommended Practices for Safety and Health Programs
9) EQUIPMENT DAILY CHECKLIST AND SAFETY INSPECTION FORM
10) Worksite Hazard Analysis
11) Hazard Prevention and Control
12) Incident/Accident Analysis
13) Incident Investigation Pre-Test
14) Forms for Recording Work-Related Injuries and Illnesses

OSHA Focus Four Hazards:Electrocution

OSHA Focus Four Hazards:Struck-By

OSHA Focus Four Hazards:Caught-In or Between

OSHA Focus Four Hazards – Falls

Personal Protective Equipment

1) PPE Safety Training for Construction Workers
2) ABCs of Active Fall Protection | Anchor, Body Harness, Connector
3) Fall Protection Anchors for Construction - clamps, I-beam, beamer, strap (M3V1 Anchors Overview)
4) Donning a Fall Protection Harness
5) Selection, Fit Test of Harness
6) Inspection Procedures Harness
7) Respiratory Protection in Construction: An Overview of Hazards & OSHA's Program Requirements
8) Toolbox Talk: Eye Protection
9) Testing common types of Personal Protective Equipment (PPE)
10) How to Select and Use Hearing Protection
11) Personal Protective Equipment
12) Personal Protective Equipment

Health Hazards in Construction

Stairways and Ladders

1) Electrocution/Work Safely with Ladders Near Power Lines
2) Subpart X
3) OSHA-Stairways and Ladders
4) Ladder Safety
5) Misuse of Portable Ladders
6) Stairways and Ladders
7) What is Ladder Safety? | Fall Protection, Safety, Hazards, Training
8) The Most Dangerous Tool | Ladder Safety Training
9) How to Inspect and Maintain Your Ladder
10) Portable Ladder Safety Training
11) Stairways and Ladders PPT
12) Ladder Safety Month 2020
13) Portable Ladder Inspection Checklist
14) Ladder Inspection Form
15) Reducing Falls in Construction: Safe Use of Extension Ladders
16) Reducing Falls in Construction: Safe Use of Job-made Wooden Ladders
17) Portable Ladder Safety

Introduction to Supported Scaffolds

1) Learning Outcomes
2) Supported Scaffold Overview
3) Competent Person
4) Using Scaffolding Correctly - Apartment Construction Demonstration
5) Scaffold Base Plates & Sills Preview
6) Importance of Baseplates
7) Importance of Bracing
8) Guidelines for Guying and Tying of Scaffolds Preview
9) Guidelines for Guying and Tying of Scaffolds
10) Supported Scaffold NYC
11) 1926.450 SUBPART L SCAFFOLDS
12) Supported scaffolds Requirements and best practices Oregon OSHA

Safety and Health Programs

Welding and Cutting

1) HOT WORK FACT SHEET
2) Hot Work: Hidden Hazards
3) Welding Safety Tips and Precautions You Need to Know
4) Oxy-fuel Equipment Safety
5) Oxygen and Acetylene Safety Precautions
6) Welding Safety: Electric Shock
7) Electric Welding Safety: How to be Safe
8) Grinder Safety | How to Properly Use an Angle Grinder
9) Blankets
10) Hot Work Permit
11) Fire Watch
12) Controlling Hazardous Fume and Gases during Welding
13) Cutting, Welding, and Other Hot Work
14) Welding and Cutting Safety
15) Controlling Hazardous Fume and Gases during Welding

Fire Protection and Prevention

1) Construction Fire Safety Practices
2) Construction Fire Safety Practices
3) Yearly Fire Extinguisher Inspection
4) Monthly Fire Extinguisher Inspections
5) HAZARDS OF FLAMMABLE GASES, LIQUIDS & AEROSOLS & RISK MINIMIZATION
6) Hot Work Safety
7) Hazard Communication Guidance for Combustible Dusts
8) Fire science
9) FIRE PROTECTION SYSTEMS
10) Chemical Storage
11) Good Housekeeping Practice
12) Fire Protection and Prevention
13) Welding, Cutting and Brazing Safety
14) How fire sprinkler systems work (3D Animation)
15) CO2 Laser Machine Fire Suppression System
16) Fire Suppression System Simulation

Ergonomics In Construction

1) SAVE 1 - Introduction, Anatomy & Cumulative Trauma
2) Toolbox Talk: What is Ergonomics?
3) Ergonomics Basics
4) Toolbox Talk: Ergonomics in Construction
5) Fitness or Duty
6) Virtual Toolbox Talk- Ergonomics
7) Controlling Ergonomic Hazards
8) Design for Construction Safety
9) Material Handling
10) A Safety Manager’s Guide to EARLY INTERVENTION
11) Identifying and Addressing Ergonomic Hazards Workbook
12) Ergonomics Programs

Cranes, Derricks, Hoists, Elevators and Conveyors.

1) Crane Safety Awareness For Site Superintendents
2) Boom Deflection & Shock Loading | Sims Crane Minute
3) How to Calculate & Determine the Weight of a Load for Overhead Lifts
4) Shock loads explained
5) Why Things Fall Off Cranes
6) Why Cranes Collapse
7) Crane Hand Signals in 2 Minutes
8) Signalperson Changes
9) Crane Operator Responsibilities
10) What Is a Lift Director
11) Basic Crane Hand Signals
12) Cranes and Derricks in Construction: Qualified Rigger
13) Cranes, Derricks, Hoists, Elevators, & Conveyors
14) Hoisting and Rigging
15) National Accelerator Laboratory
16) Hoisting and Rigging Fundamentals
17) OSHA Cranes & Derricks Subpart CC

Materials Handling, Storage, Use and Disposal

1) Material Handling, Storage, and Disposal
2) Safety Toolbox Talks: Material Handling and Safe Lifting
3) Toolbox Talk: Material Handling
4) Materials Handling, Storage OSHA
5) Storage of Materials
6) Manual Materials Handling on a Construction Project
7) Lifting - Using the Power Zone
8) Proper Lifting
9) HOUSEKEEPING AT CONSTRUCTION SITE(TIPS)
10) Housekeeping - The importance of the basics
11) Public Safety Orientation For Construction Sites
12) How to use A Manual Pallet Jack - Safety And Operation Of Pallet Truck

Concrete and Masonry

1) Concrete and Masonry Operations
2) New York Construction Accident Animation
3) Cement Reaction
4) Portland Cement Safety
5) Concrete Pump Hose Whips, Killing Worker
6) Working Safely Around Concrete Pumps
7) OSHA-Limited Access Zone
8) Masonry Safety
9) What is Silica Dust:
10) Health and Safety Risk Reductions Using Pre fabricated Concrete Formwork Systems
11) Concrete and Masonry Construction
12) Preventing Skin Problems from Working with Portland Cement
13) Concrete and Masonry Construction
14) Laborer, Pipefitter, and Utility Foreman Crushed by Falling Block Wall

Trenching and Excavation Safety

1) Trenching and Excavation Safety Fact Sheet
2) Trenching and Excavation Safety
3) Safety Toolbox Talks: Trenching and Excavation Safety
4) Excavations in Construction/Trenching OSHA
5) Trenching, Shoring and The Competent Person
6) What are the Different Types of Soil? Trenching and Excavation
7) What is the Maximum Slope for Different Soil Types? Sloping and Benching |
8) Trench Safety - Intro and Competent Person
9) TRENCHING & EXCAVATION SAFETY
10) Inspecting a Trench for Fissures and Cracking
11) Underpinning Explainer
12) Excavation Hazardous Atmosphere

Motor Vehicles, Mechanized Equipment, and Marine Operations

Powered Industrial Vehicles

Confined Spaces

1) 6 Common Confined Space Questions Answered
2) What is a Confined Space
3) Permit-Required Confined Space
4) What is an Entry Permit What is a Confined Space Entry Permit: Confined Space Hazards
5) Confined Space Roles
6) Confined Spaces Deadly Spaces: Carbon Monoxide, Hydrogen Sulphide, and Other Toxic Gases
7) Confined Space Air Monitoring
8) Ventilation in Confined Space
9) Reclassifying Permit-Required Confined Spaces (PRCS)
10) Retrieval and Emergency Services in Confined Spaces
11) Confined Space Basics
12) Confined Spaces in Residential Construction
13) Is 911 your Confined Space Rescue Plan?
14) FATAL Facts

View More Module

Upon completion of the lesson, participants will be able to: Identify major hazards and describe types of hazards associated with, Construction Safety.

course

Price: Free

Enroll Free Course

You will be awarded a certificate instantly.

This Course Includes

Modules : 28
Duration : 30 Hours
Certificate : Yes:
Language : English
Skill Level : Expert

money back

NYC Construction Safety Training (PdhSafety.com) aims to offer quality training that is relevant and useful for the construction industry. These efforts include offering training courses that are essential for achieving success and career outcomes in the construction industry, ensuring that course material is both useful and applicable. We conduct perpetual reviews of training materials to maintain accuracy and relevance, and we are committed to developing a team of high-quality staff and instructors.

Email Address mail@pdhsafety.com
Office Address 189 Valentine Ln Yonkers, New York 10705