OSHA Training Free

30 Hour OSHA Construction Safety and Health

30 Hour OSHA Construction Safety and Health

27 Modules

Course Modules - (27)

  • 1) Learning Outcomes
  • 2) Introduction to OSHA
  • 3) The OSHA Inspection Process
  • 4) How to File a Whistleblower Retaliation Complaint
  • 5) How to Read OSHA Standard
  • 6) How to Read OSHA Standard PDF
  • 7) Introduction to OSHA Power Point Presentation
  • 8) All About OSHA
  • 9) Workers’ Rights
  • 10) Job Safety and Health IT’S THE LAW!
  • 1) Managing Safety and Health The Basics
  • 2) How the Components Interact
  • 3) Identifying the Marks of Excellence
  • 4) ACCIDENT VS INCIDENT | The difference explained.
  • 5) Safety Manager
  • 6) Recommended Practices for Safety and Health Programs
  • 7) Guide to Developing Your Workplace Injury & Illness Prevention Program
  • 8) Construction Safety Inspection
  • 9) EQUIPMENT DAILY CHECKLIST AND SAFETY INSPECTION FORM
  • 10) Worksite Hazard Analysis
  • 11) Hazard Prevention and Control
  • 12) Incident/Accident Analysis
  • 13) Incident Investigation Pre-Test
  • 14) Forms for Recording Work-Related Injuries and Illnesses
  • 1) Electrocution/Work Safely with Ladders Near Power Lines
  • 2) Prevent Electrocutions: Work Safely with Cranes near Power Lines
  • 3) Electrical Safety Awareness for Non-Electrical Workers | Schneider Electric
  • 4) OSHA Focus Four Hazards:Electrocution
  • 5) Electrical Hazards
  • 6) Focus Four - Electrical
  • 7) How To Prevent Electrocution
  • 1) Struck-by Accidents in Construction/Swinging Cranes
  • 2) Struck by Falling Hazards
  • 3) Struck-by Accidents in Construction/Vehicle Back-Over
  • 4) Excavator Accident: Concrete Barrier Strikes Worker
  • 5) Focus Four Hazards:Struck-By
  • 6) Preventing Struck-by Injuries in Construction
  • 7) Focus Four- Struck By Training
  • 8) Struck-By Hazards
  • 9) Focus Four Struck-By Hazards
  • 1) Excavations in Construction/Trenching
  • 2) 5 Things You Should Know to Stay Safe in a Trench
  • 3) Focus Four Hazards:Caught-In or Between
  • 4) Focus Four Caught In-On-Between
  • 5) Toolbox Safety Topic Caught in or Between Hazards
  • 6) Focus Four - Caught in Between
  • 1) Work Place Falls and Injuries
  • 2) Falling Object Protection
  • 3) Walking-Working Surfaces OSHA Standard
  • 4) Fall Hazard Recognition
  • 5) How to Calculate Fall Distance | Fall Protection, Safety, Hazards, Training
  • 6) Fall Protection Fact Sheet
  • 7) Focus Four- Falls
  • 8) Slips Trips and Fall Hazards
  • 1) PPE Safety Training for Construction Workers
  • 2) ABCs of Active Fall Protection | Anchor, Body Harness, Connector
  • 3) Fall Protection Anchors for Construction - clamps, I-beam, beamer, strap (M3V1 Anchors Overview)
  • 4) Donning a Fall Protection Harness
  • 5) Selection, Fit Test of Harness
  • 6) Inspection Procedures Harness
  • 7) Respiratory Protection in Construction: An Overview of Hazards & OSHA's Program Requirements
  • 8) Toolbox Talk: Eye Protection
  • 9) Testing common types of Personal Protective Equipment (PPE)
  • 10) How to Select and Use Hearing Protection
  • 11) Personal Protective Equipment
  • 12) Personal Protective Equipment
  • 1) Silica Safety Awareness
  • 2) Respiratory Protection in Construction: An Overview of Hazards & OSHA's Program Requirements
  • 3) Protecting Workers from Silica Hazards in the Workplace Video
  • 4) Health Hazards in Construction
  • 5) Health Hazards in Construction Workbook
  • 6) Controlling Silica Exposures in Construction
  • 7) Controlling Silica Exposures in Construction Fact Sheet
  • 8) Protecting Yourself From Noise in Construction OSHA
  • 9) Construction Noise & Hearing Loss Prevention
  • 10) Hazard Communication Training
  • 1) Electrocution/Work Safely with Ladders Near Power Lines
  • 2) Subpart X
  • 3) OSHA-Stairways and Ladders
  • 4) Ladder Safety
  • 5) Misuse of Portable Ladders
  • 6) Stairways and Ladders
  • 7) What is Ladder Safety? | Fall Protection, Safety, Hazards, Training
  • 8) The Most Dangerous Tool | Ladder Safety Training
  • 9) How to Inspect and Maintain Your Ladder
  • 10) Portable Ladder Safety Training
  • 11) Stairways and Ladders PPT
  • 12) Ladder Safety Month 2020
  • 13) Portable Ladder Inspection Checklist
  • 14) Ladder Inspection Form
  • 15) Reducing Falls in Construction: Safe Use of Extension Ladders
  • 16) Reducing Falls in Construction: Safe Use of Job-made Wooden Ladders
  • 17) Portable Ladder Safety
  • 1) Learning Outcomes
  • 2) Supported Scaffold Overview
  • 3) Competent Person
  • 4) Using Scaffolding Correctly - Apartment Construction Demonstration
  • 5) Scaffold Base Plates & Sills Preview
  • 6) Importance of Baseplates
  • 7) Importance of Bracing
  • 8) Guidelines for Guying and Tying of Scaffolds Preview
  • 9) Guidelines for Guying and Tying of Scaffolds
  • 10) Supported Scaffold NYC
  • 11) 1926.450 SUBPART L SCAFFOLDS
  • 12) Supported scaffolds Requirements and best practices Oregon OSHA
  • 1) OSHA-What are the capacity requirements for all scaffolds?
  • 2) OSHA-Scaffold Platform Construction
  • 3) OSHA-Criteria for Supported Scaffolds
  • 4) OSHA-Access Requirements
  • 5) OSHA-Use Requirements
  • 6) OSHA-Fall Protection Requirements
  • 7) OSHA-Falling Object Protection
  • 1) OSHA-Fabricated Frame
  • 2) OSHA-Support Structure
  • 3) OSHA-Major Components - braces, tiebacks & guardrail systems
  • 4) OSHA-(Common Causes & Prevention) Fall Protection
  • 5) OSHA-Electrical Hazards
  • 1) OSHA-Ladder Jack
  • 2) OSHA-Mast Climbers
  • 3) OSHA-Pole or Wood Pole
  • 4) OSHA-Pump Jack
  • 5) OSHA-Specialty and Other Scaffolds
  • 1) Health and Safety Program
  • 2) 10 Steps to Creating an Effective Safety Program in Your Workplace
  • 3) Safety and Health Programs
  • 4) Hierarchy Of Controls Toolbox Talk
  • 5) Job Hazard Analysis Using the Risk Matrix
  • 6) Recommended Practices for Safety & Health Programs in Construction
  • 7) Common Components of Site-Specific Safety Plan
  • 8) Systems of Safety and Introduction to Logic Tree Diagraming
  • 9) The Importance of Root Cause Analysis During Incident Investigation
  • 10) Construction Safety & Injury Prevention Program
  • 1) HOT WORK FACT SHEET
  • 2) Hot Work: Hidden Hazards
  • 3) Welding Safety Tips and Precautions You Need to Know
  • 4) Oxy-fuel Equipment Safety
  • 5) Oxygen and Acetylene Safety Precautions
  • 6) Welding Safety: Electric Shock
  • 7) Electric Welding Safety: How to be Safe
  • 8) Grinder Safety | How to Properly Use an Angle Grinder
  • 9) Blankets
  • 10) Hot Work Permit
  • 11) Fire Watch
  • 12) Controlling Hazardous Fume and Gases during Welding
  • 13) Cutting, Welding, and Other Hot Work
  • 14) Welding and Cutting Safety
  • 1) Construction Fire Safety Practices
  • 2) Construction Fire Safety Practices
  • 3) Yearly Fire Extinguisher Inspection
  • 4) Monthly Fire Extinguisher Inspections
  • 5) HAZARDS OF FLAMMABLE GASES, LIQUIDS & AEROSOLS & RISK MINIMIZATION
  • 6) Hot Work Safety
  • 7) Hazard Communication Guidance for Combustible Dusts
  • 8) Fire science
  • 9) FIRE PROTECTION SYSTEMS
  • 10) Chemical Storage
  • 11) Good Housekeeping Practice
  • 12) Fire Protection and Prevention
  • 13) Welding, Cutting and Brazing Safety
  • 14) How fire sprinkler systems work (3D Animation)
  • 15) CO2 Laser Machine Fire Suppression System
  • 16) Fire Suppression System Simulation
  • 1) SAVE 1 - Introduction, Anatomy & Cumulative Trauma
  • 2) Toolbox Talk: What is Ergonomics?
  • 3) Ergonomics Basics
  • 4) Toolbox Talk: Ergonomics in Construction
  • 5) Fitness or Duty
  • 6) Virtual Toolbox Talk- Ergonomics
  • 7) Controlling Ergonomic Hazards
  • 8) Design for Construction Safety
  • 9) Material Handling
  • 10) A Safety Manager’s Guide to EARLY INTERVENTION
  • 11) Identifying and Addressing Ergonomic Hazards Workbook
  • 12) Ergonomics Programs
  • 1) Crane Safety Awareness For Site Superintendents
  • 2) Boom Deflection & Shock Loading | Sims Crane Minute
  • 3) How to Calculate & Determine the Weight of a Load for Overhead Lifts
  • 4) Shock loads explained
  • 5) Why Things Fall Off Cranes
  • 6) Why Cranes Collapse
  • 7) Crane Hand Signals in 2 Minutes
  • 8) Signalperson Changes
  • 9) Crane Operator Responsibilities
  • 10) What Is a Lift Director
  • 11) Basic Crane Hand Signals
  • 12) Cranes and Derricks in Construction: Qualified Rigger
  • 13) Cranes, Derricks, Hoists, Elevators, & Conveyors
  • 14) Hoisting and Rigging
  • 15) National Accelerator Laboratory
  • 16) Hoisting and Rigging Fundamentals
  • 17) OSHA Cranes & Derricks Subpart CC
  • 1) Material Handling, Storage, and Disposal
  • 2) Safety Toolbox Talks: Material Handling and Safe Lifting
  • 3) Toolbox Talk: Material Handling
  • 4) Materials Handling, Storage OSHA
  • 5) Storage of Materials
  • 6) Manual Materials Handling on a Construction Project
  • 7) Lifting - Using the Power Zone
  • 8) Proper Lifting
  • 9) HOUSEKEEPING AT CONSTRUCTION SITE(TIPS)
  • 10) Housekeeping - The importance of the basics
  • 11) Public Safety Orientation For Construction Sites
  • 12) How to use A Manual Pallet Jack - Safety And Operation Of Pallet Truck
  • 1) Concrete and Masonry Operations
  • 2) New York Construction Accident Animation
  • 3) Cement Reaction
  • 4) Portland Cement Safety
  • 5) Concrete Pump Hose Whips, Killing Worker
  • 6) Working Safely Around Concrete Pumps
  • 7) OSHA-Limited Access Zone
  • 8) Masonry Safety
  • 9) What is Silica Dust:
  • 10) Health and Safety Risk Reductions Using Pre fabricated Concrete Formwork Systems
  • 11) Concrete and Masonry Construction
  • 12) Preventing Skin Problems from Working with Portland Cement
  • 13) Concrete and Masonry Construction
  • 14) Laborer, Pipefitter, and Utility Foreman Crushed by Falling Block Wall
  • 1) Trenching and Excavation Safety Fact Sheet
  • 2) Trenching and Excavation Safety
  • 3) Safety Toolbox Talks: Trenching and Excavation Safety
  • 4) Excavations in Construction/Trenching OSHA
  • 5) Trenching, Shoring and The Competent Person
  • 6) What are the Different Types of Soil? Trenching and Excavation
  • 7) What is the Maximum Slope for Different Soil Types? Sloping and Benching |
  • 8) Trench Safety - Intro and Competent Person
  • 9) TRENCHING & EXCAVATION SAFETY
  • 10) Inspecting a Trench for Fissures and Cracking
  • 11) Underpinning Explainer
  • 12) Excavation Hazardous Atmosphere
  • 1) Motor Vehicles, Equipment
  • 2) OSHA / ANSI Safety Sign Standards
  • 3) Construction Traffic Control : Top 7 Steps of Traffic Control | Roadside Construction Safety 2021
  • 4) How to Do a Pre-Trip Inspection - Flatbed
  • 5) Rollover Protective Structures
  • 6) Roll Over Protection Structure (R.O.P.S.)
  • 7) Vehicle Safety
  • 8) Hold on - Slips trips and falls
  • 9) Access to Vessels
  • 10) Lifesaving Equipment and Personal Flotation Devices
  • 1) Steel Erection Safety OSHA
  • 2) Steel Erection and Fall Protection
  • 3) Key Elements in OSHA Standards for Steel Erection
  • 4) Toolbox Talk: Steel Erection Safety
  • 5) Rigging Safety-RigRing Overhead Load Safety Signaling Device
  • 6) RIGGING FUNDAMENTALS
  • 7) Controlling Contactor’s obligations under Code
  • 1) OSHA Regulations & Required Training for Powered Industrial Truck Operators
  • 2) Working Around Powered Mobile Equipment
  • 3) Spotter Safety in the Workplace
  • 4) Telehandler inspection How to do a Telehandler Pre-Operation Inspection
  • 5) JLG Telehandler Operator Safety
  • 6) FORKLIFT TRAINING:
  • 7) Forklift Truck Safety Hazards
  • 8) OSHA Pre-Shift Inspection
  • 9) Powered Industrial Vehicles
  • 10) MAINTENANCE PLAN
  • 1) How Important is Hand and Power Tool Safety
  • 2) Power Tool Safety — It's In Your Hands
  • 3) TOOLBOX TALK: HAND TOOL SAFETY
  • 4) Hand and Power Tool Safety
  • 5) Hand Tools
  • 6) Hilti Powder-Actuated Systems
  • 7) GUARDS AND FACESHIELDS
  • 8) Hand and Portable Power Tools
  • 9) Amputation Fact Sheet
  • 1) Extinguisher Basics
  • 2) Fire Extinguisher Use
  • 3) Extinguisher Placement and Spacing
  • 4) Hydrostatic Testing
  • 5) OSHA Requirements
  • 1) 6 Common Confined Space Questions Answered
  • 2) What is a Confined Space
  • 3) Permit-Required Confined Space
  • 4) What is an Entry Permit What is a Confined Space Entry Permit: Confined Space Hazards
  • 5) Confined Space Roles
  • 6) Confined Spaces Deadly Spaces: Carbon Monoxide, Hydrogen Sulphide, and Other Toxic Gases
  • 7) Confined Space Air Monitoring
  • 8) Ventilation in Confined Space
  • 9) Reclassifying Permit-Required Confined Spaces (PRCS)
  • 10) Retrieval and Emergency Services in Confined Spaces
  • 11) Confined Space Basics
  • 12) Confined Spaces in Residential Construction
  • 13) Is 911 your Confined Space Rescue Plan?
  • 14) FATAL Facts

This course provides the knowledge, skills and attitudes regarding the importance and value of safety and health training for workers and the Occupational Safety and Health Administration (OSHA) background, mission and current standards

 Upon completion of the lesson, participants will be able to: Identify major hazards and describe types of hazards associated with, Construction Safety. 


course
Price: Free
You will be awarded a certificate instantly.

This Course Includes

  • Modules : 27
  • Duration : 30 Hours
  • Certificate : Yes:
  • Language : English
  • Skill Level : Expert
money back