Free OSHA Certification Online

30 Hour OSHA in Construction Safety and Health

27 Modules

Course Modules - (27)

  • 1) Learning Outcomes
  • 2) Introduction To OSHA
  • 3) Introduction to OSHA
  • 4) The OSHA Inspection Process
  • 5) Introduction to OSHA Power Point Presentation
  • 6) 1 hour presentation – Outreach Trainer Guide Intro to OSHA
  • 7) How to Read OSHA Standard
  • 8) Workers’ Rights PSHA
  • 1) Building a Safety Culture: Improving Safety and Health Management in the Construction Industry
  • 2) Managing Safety and Health The Basics
  • 3) How the Components Interact
  • 4) Identifying the Marks of Excellence
  • 5) Recommended Practices for Safety and Health Programs
  • 6) Guide to Developing Your Workplace Injury & Illness Prevention Program
  • 7) Construction Safety Inspection
  • 8) EQUIPMENT DAILY CHECKLIST AND SAFETY INSPECTION FORM
  • 9) 1926.1412(a) Modified equipment.
  • 10) Worksite Hazard Analysis
  • 11) Hazard Prevention and Control
  • 12) Incident/Accident Analysis
  • 13) Incident Investigation Pre-Test
  • 14) Forms for Recording Work-Related Injuries and Illnesses
  • 15) Safety Manager
  • 16) ACCIDENT VS INCIDENT | The difference explained.
  • 1) Electrocution/Work Safely with Ladders Near Power Lines
  • 2) Prevent Electrocutions: Work Safely with Cranes near Power Lines
  • 3) Electrical Safety Awareness for Non-Electrical Workers | Schneider Electric
  • 4) OSHA Focus Four Hazards:Electrocution
  • 5) Electrical Hazards
  • 6) Focus Four - Electrical
  • 7) How To Prevent Electrocution
  • 1) Struck-by Accidents in Construction/Swinging Cranes
  • 2) Struck by Falling Hazards
  • 3) Struck-by Accidents in Construction/Vehicle Back-Over
  • 4) Excavator Accident: Concrete Barrier Strikes Worker
  • 5) Focus Four Hazards:Struck-By
  • 6) Preventing Struck-by Injuries in Construction
  • 7) Focus Four- Struck By Training
  • 8) Struck-By Hazards
  • 9) Focus Four Struck-By Hazards
  • 1) Excavations in Construction/Trenching
  • 2) 5 Things You Should Know to Stay Safe in a Trench
  • 3) Focus Four Hazards:Caught-In or Between
  • 4) Focus Four Caught In-On-Between
  • 5) Toolbox Safety Topic Caught in or Between Hazards
  • 6) Focus Four - Caught in Between
  • 1) Work Place Falls and Injuries
  • 2) Falling Object Protection
  • 3) Walking-Working Surfaces OSHA Standard
  • 4) Slips, Trips & Falls
  • 5) Fall Hazard Recognition
  • 6) How to Calculate Fall Distance | Fall Protection, Safety, Hazards, Training
  • 7) Fall Protection Fact Sheet
  • 8) Focus Four- Falls
  • 9) Slips Trips and Fall Hazards
  • 1) Donning a Fall Protection Harness
  • 2) Selection, Fit Test of Harness
  • 3) Inspection Procedures Harness
  • 4) Personal Protective Equipment (PPE)
  • 5) Personal Protective Equipment OSHA
  • 6) Personal Protective Equipment (PPE) Training Course.
  • 7) Testing common types of Personal Protective Equipment (PPE)
  • 1) Silica Safety Awareness
  • 2) Controlling Respirable Crystalline Silica: Handheld Grinders for Mortar Removal (Tuckpointing)
  • 3) Controlling Respirable Crystalline Silica: Handheld Grinders for Uses Other Than Mortar Removal
  • 4) Controlling Respirable Crystalline Silica: Jackhammers and Handheld Powered Chipping Tools
  • 5) Controlling Respirable Crystalline Silica in Construction: Stationary Masonry Saws
  • 6) Controlling Respirable Crystalline Silica in Construction: Handheld Power Saws (Any Blade Diameter)
  • 7) Protecting Workers from Silica Hazards in the Workplace Video
  • 8) Health Hazards in Construction
  • 9) Health Hazards in Construction Workbook
  • 10) Controlling Silica Exposures in Construction
  • 11) Controlling Silica Exposures in Construction Fact Sheet
  • 12) Avoid Noise
  • 13) Protecting Yourself From Noise in Construction OSHA
  • 14) Construction Noise: Exposure, Effects, and the Potential for Remediation; A Review and Analysis
  • 15) Construction Noise & Hearing Loss Prevention
  • 16) Hazard Communication Training
  • 1) What is Ladder Safety? | Fall Protection, Safety, Hazards, Training
  • 2) How to Inspect and Maintain Your Ladder
  • 3) Misuse of Portable Ladders
  • 4) Ladder Safety
  • 5) Stairways and Ladders OSHA
  • 6) Stairways and Ladders
  • 7) Stairways and Ladders PPT
  • 8) The Most Dangerous Tool | Ladder Safety Training
  • 9) Portable Ladder Safety Training
  • 10) Ladder Safety Month 2020
  • 11) Workplace Accidents from Ladders | Fatal Falls From Ladders, OSHA, Fall Protection Training
  • 12) Portable Ladder Inspection Checklist
  • 13) Ladder Inspection Form
  • 14) Electrocution/Work Safely with Ladders Near Power Lines
  • 1) Learning Outcomes
  • 2) Supported Scaffold Overview
  • 3) Competent Person
  • 4) Using Scaffolding Correctly - Apartment Construction Demonstration
  • 5) Scaffold Base Plates & Sills Preview
  • 6) Importance of Baseplates
  • 7) Importance of Bracing
  • 8) Guidelines for Guying and Tying of Scaffolds Preview
  • 9) Guidelines for Guying and Tying of Scaffolds
  • 10) Supported Scaffold NYC
  • 11) 1926.450 SUBPART L SCAFFOLDS
  • 12) Supported scaffolds Requirements and best practices Oregon OSHA
  • 1) OSHA-What are the capacity requirements for all scaffolds?
  • 2) OSHA-Scaffold Platform Construction
  • 3) OSHA-Criteria for Supported Scaffolds
  • 4) OSHA-Access Requirements
  • 5) OSHA-Use Requirements
  • 6) OSHA-Fall Protection Requirements
  • 7) OSHA-Falling Object Protection
  • 8) Scaffold General Requirements
  • 1) OSHA-Fabricated Frame
  • 2) OSHA-Support Structure
  • 3) OSHA-Major Components - braces, tiebacks & guardrail systems
  • 4) OSHA-(Common Causes & Prevention) Fall Protection
  • 5) OSHA-Electrical Hazards
  • 1) Introduction to Confined Space
  • 2) Introduction to Permit Required Space
  • 3) Confined Space Construction
  • 4) Fatality in Confines Space
  • 5) Toxic Gas Poisoning in Manhole
  • 6) Host Employer and Competent Person
  • 7) Confined Space Roles
  • 1) Confined Space Hazards: Construction Ventilation in Confined Spaces
  • 2) Confined Spaces Deadly Spaces:
  • 3) Confined Space Hazards: Atmospheric Testing
  • 4) Flashpoint, Flame Point and Autoignition
  • 5) Hazards Gases
  • 6) Confined Space Hazards Toxic Atmospheres
  • 1) Entry Permit
  • 2) Sample Confined Space Entry Permits
  • 3) CONFINED SPACE ENTRY PERMIT
  • 4) OSHA Standard : 1926 Subpart AA - Confined Spaces in Construction
  • 5) 1926.1200
  • 6) FATAL Facts
  • 7) Permit-Required Confined Space
  • 1) Recommended Practices for Safety & Health Programs in Construction
  • 2) Common Components of Site-Specific Safety Plan
  • 3) Roles, responsibilities, and lines of authority as they relate to safety management
  • 4) A Step-by-Step Guide: Incident Investigations
  • 5) Systems of Safety and Introduction to Logic Tree Diagraming
  • 6) Audit Checklist
  • 7) The Importance of Root Cause Analysis During Incident Investigation
  • 8) Basic Risk Management Concepts
  • 9) Risk Management in Construction
  • 10) Construction Safety & Injury Prevention Program
  • 11) Health and Safety Standards and Best Practices Quiz
  • 12) Health and Safety Program
  • 13) 10 Steps to Creating an Effective Safety Program in Your Workplace
  • 1) HOT WORK FACT SHEET
  • 2) Cutting, Welding, and Other Hot Work
  • 3) Hot Work: Hidden Hazards
  • 4) Small Entity Compliance Guide for the Hexavalent Chromium Standards OSHA
  • 5) Welding, Burning, & Cutting
  • 6) Welding and Cutting Safety
  • 7) Welding Safety Tips and Precautions You Need to Know
  • 8) Oxy-Fuel Equipment Operation and Safety
  • 9) Welding Safety: Electric Shock
  • 10) Grinder Safety | How to Properly Use an Angle Grinder
  • 11) Blankets
  • 12) Oxygen and Acetylene Safety Precautions
  • 13) Fire Watch
  • 1) Construction Fire Safety Practices
  • 2) Construction Fire Safety Practices
  • 3) Yearly Fire Extinguisher Inspection
  • 4) Monthly Fire Extinguisher Inspections
  • 5) HAZARDS OF FLAMMABLE GASES, LIQUIDS & AEROSOLS & RISK MINIMIZATION
  • 6) Hot Work Safety
  • 7) Hazard Communication Guidance for Combustible Dusts
  • 8) Fire science
  • 9) FIRE PROTECTION SYSTEMS
  • 10) Chemical Storage
  • 11) Good Housekeeping Practice
  • 12) Fire Protection and Prevention
  • 13) Welding, Cutting and Brazing Safety
  • 14) How fire sprinkler systems work (3D Animation)
  • 15) CO2 Laser Machine Fire Suppression System
  • 16) Fire Suppression System Simulation
  • 1) Ergonomics Basics
  • 2) Fit for Duty Program
  • 3) Fitness or Duty
  • 4) Stressors at Work
  • 5) Controlling Ergonomic Hazards
  • 6) Design for Construction Safety
  • 7) Material Handling
  • 8) A Safety Manager’s Guide to EARLY INTERVENTION
  • 9) Material Handling Quiz
  • 10) Identifying and Addressing Ergonomic Hazards Workbook
  • 11) Toolbox Talk: Ergonomics in Construction
  • 12) Ergonomics Programs
  • 1) Hoisting and Rigging
  • 2) Hoisting and Rigging Fundamentals
  • 3) National Accelerator Laboratory
  • 4) Crane Safety Awareness For Site Superintendents
  • 5) Cranes and Derricks in Construction: Qualified Rigger
  • 6) Cranes, Derricks, Hoists, Elevators, & Conveyors
  • 7) How to Calculate & Determine the Weight of a Load for Overhead Lifts
  • 8) Boom Deflection & Shock Loading | Sims Crane Minute
  • 9) Shock loads explained
  • 10) Why Things Fall Off Cranes
  • 11) Why Cranes Collapse
  • 12) Crane Hand Signals in 2 Minutes
  • 13) What Is a Lift Director
  • 14) Crane Operator Responsibilities
  • 15) Signalperson Changes
  • 16) OSHA Cranes & Derricks Subpart CC
  • 17) Basic Crane Hand Signals
  • 1) Material Handling, Storage, and Disposal
  • 2) Safety Toolbox Talks: Material Handling and Safe Lifting
  • 3) Toolbox Talk: Material Handling
  • 4) Materials Handling, Storage OSHA
  • 5) Storage of Materials
  • 6) Manual Materials Handling on a Construction Project
  • 7) Lifting - Using the Power Zone
  • 8) Proper Lifting
  • 9) HOUSEKEEPING AT CONSTRUCTION SITE(TIPS)
  • 10) Housekeeping - The importance of the basics
  • 11) Public Safety Orientation For Construction Sites
  • 12) How to use A Manual Pallet Jack - Safety And Operation Of Pallet Truck
  • 1) Concrete and Masonry Construction
  • 2) Concrete and Masonry Construction
  • 3) Laborer, Pipefitter, and Utility Foreman Crushed by Falling Block Wall
  • 4) Concrete and Masonry Operations
  • 5) New York Construction Accident Animation
  • 6) Cement Reaction
  • 7) Masonry Safety
  • 8) Concrete Safety Orientation
  • 9) Portland Cement Safety
  • 10) Preventing Skin Problems from Working with Portland Cement
  • 11) Safe Operations of Concrete Pump
  • 12) Health and Safety Risk Reductions Using Pre fabricated Concrete Formwork Systems
  • 1) Trenching and Excavation Safety Fact Sheet
  • 2) Trenching and Excavation Safety
  • 3) Safety Toolbox Talks: Trenching and Excavation Safety
  • 4) Excavations in Construction/Trenching OSHA
  • 5) Trenching, Shoring and The Competent Person
  • 6) What are the Different Types of Soil? Trenching and Excavation
  • 7) What is the Maximum Slope for Different Soil Types? Sloping and Benching |
  • 8) Trench Safety - Intro and Competent Person
  • 9) TRENCHING & EXCAVATION SAFETY
  • 10) Inspecting a Trench for Fissures and Cracking
  • 11) Underpinning Explainer
  • 12) Excavation Hazardous Atmosphere
  • 1) Signals and Barricades
  • 2) Signals and Barricades Oregon OSHA
  • 3) OSHA / ANSI Safety Sign Standards
  • 4) Rollover Protective Structures
  • 5) Roll Over Protective Structures
  • 6) Falling Object Protection | Tool Lanyards, Safety Nets, Fall Protection
  • 7) Working Around Powered Mobile Equipment
  • 8) Construction Traffic Control : Top 7 Steps of Traffic Control | Roadside Construction Safety 2021
  • 9) How to Do a Pre-Trip Inspection - Flatbed
  • 10) Vehicle Safety
  • 1) Powered Industrial Vehicles
  • 2) Powered Industrial Vehicles
  • 3) Powered Industrial Vehicles OSHA
  • 4) Working Around Powered Mobile Equipment
  • 5) Spotter Safety in the Workplace
  • 6) OSHA Pre-Shift Inspection
  • 7) Telehandler inspection How to do a Telehandler Pre-Operation Inspection
  • 8) Telehandler Load Charts
  • 9) MAINTENANCE PLAN
  • 10) FORKLIFT TRAINING:
  • 1) Steel Erection Safety OSHA
  • 2) Steel Erection and Fall Protection
  • 3) Key Elements in OSHA Standards for Steel Erection
  • 4) Toolbox Talk: Steel Erection Safety
  • 5) Rigging Safety-RigRing Overhead Load Safety Signaling Device
  • 6) RIGGING FUNDAMENTALS
  • 7) Controlling Contactor’s obligations under Code
  • 1) Hand and Power
  • 2) Hand and Power Tool Safety
  • 3) Hand and Portable Power Tools
  • 4) TOOLBOX TALK: HAND TOOL SAFETY
  • 5) Amputation Fact Sheet
  • 6) Hand Tools
  • 7) Hilti Powder-Actuated Systems

This course provides the knowledge, skills and attitudes regarding the importance and value of safety and health training for workers and the Occupational Safety and Health Administration (OSHA) background, mission and current standards

 Upon completion of the lesson, participants will be able to: Identify major hazards and describe types of hazards associated with, Construction Safety. 

This Course Includes

  • Modules : 27
  • Duration : 30 Hours
  • Certificate : Yes
  • Language : English
  • Skill Level : Expert
money back